Well, it took some time, some hair pulling, some walking away from the laptop in desperation and some help from a significant other, but the shop is open!
Please take a look and tell me what you think. Click on the Etsy shop page on the website and it will take you straight to it. It has certainly been a labour of love, but I’m happy it’s up now.
I’m working on some new beads currently which will go on in the next couple of weeks (allowing time for finishing and photographing etc), but here’s a sneak preview of them on the wheel.
For now, keep well (I’m full of cold!). Love and light.
it will take me a while, but I’ve finally decided to open a little online shop. I’ve been thinking about it for a long time, and busily making yarn whilst I weighed up the pros and cons. But now, my mind is made up, so I’m beavering away in the background to get it off the ground.
It will be Etsy, because I think to start, building up a base is difficult on your lonesome! And then we’ll see how it goes.
I have a fairly large stash of two plies and art yarn, which I am working my way through organising, but also some lovely fleece from this summers dye sessions. So, it will all be going on.
For now, here’s a sneaky peak at a few piccies which will be winging their way to the new “premises” .
Love and light
This one is photos of the Mackintosh inspired jewellery. My goodness there is some wonderful creativity here. There were so many more, and my original photos are more centred, but try as I might, the bloody blog thing has come out less well! Still....
These entries were unselected.
There are lots of pictures to show you, so this post and those that follow will be piccie rich, talky poor.
As the exhibition is close to home, of course it was a must visit. Those involved in producing the work should be very proud of the skill used to create their pieces. Those who put this exhibition together have produced an amazing visual treat. Well done to all involved. I know some couldn’t get there - this is for them and as a record of what it is possible to achieve in our field.
Lastly, I really couldn’t take a photie of every last piece, but what you see here is more than just the highlights. And be aware, my photos weren’t taken with a “proper” camera taking lots of time over each, so sorry for the quality. Plus (alert - tradesman making excuses for his poor tools) the way the photos come out here is very hard to curate!!
Without further ado, enjoy.
It has been a few years since I was able to get to Woolfest. France has some wonderful woolly festivals, but often you are lucky if they are in your area, so I have missed Woolfest (and Wonderwool Wales) a lot. To go this year was a massive treat and reminded me what we had been missing. I also did a stint on the OLG stand, with old friends and new - speaking English is so great!!
So without further ado, here’s some piccies of the day. If you can get along to these festivals, do. Have a budget in mind and stick to it, but other than that, go a little crazy - I have never regretted any purchases 😁. This is woolly goodness at its best!
We (being my daughter and I) decided to have a session dyeing recently. We had not done so for quite a while and fancied some unique yarn making material. We used acid dyes that we already had, and set up in the lovely warm weather outside. As a trial, we used a fish pan on a stove, which predominantly worked, but with a gas stove, fleece that touched the sides of the pan were a little sticky, so we won’t use it again on gas!
Anyway, without further ado, here are the results. We were very happy with the results and they gave us something different to spin for about 2 weeks (note to self, dye more often lady!).
Now, I have a confession to make. I have purchased an electric spinning wheel. In fact, if I’m being 100% honest, it came into my life, brand new, last summer. OK, well it feels good to get it off my chest. Why did I get an espinner? Well, it’s the foot thing again AND portability when going away in the car. I really can’t cope without spinning even on holiday, but Tess (the Aura) is a heavy and space taking wheel when the car is full. So an espinner is a good option, as long as you have electricity (which makes me feel really guilty when I have two usable legs).
Therefore let me introduce Peter
Peter is an Ashford espinner mark 2. Now, as you can imagine, one is a little miffed (read pretty cross) that just two months after my investment, the espinner mark 3 is brought out and much smaller. Still, let’s not stop our enjoyment because of it shall we? *rage building up*
At first when I started using it, I giggled a lot, because I was making yarn with my legs crossed. Now I am past that stage!
The good points are the obvious. Portability; ability to make yarn even when you’re legs can’t do the treadling (knee issues, arthritis etc); ease of use; constant speed for “normal” spinning (ie each day you come to a project doesn’t depend on how fast/slow you treadle)
The not so good.
Control (not using your feet to slow down/stop when you want is not as easy as you would think); noise (certainly not as quiet as Tess); using electricity (as a green person, this one is big, even though I’m told it doesn’t use much juice) and this last one is really attached to control, but I’ll make special mention. I have the foot pedal for stop/starting, which I wouldn’t be without, but doing art yarns, which at times need you to stop treadling many times, are just a pain to try and do. Plus when you switch back on, it is to full speed, whereas your feet would ease back in. However, I didn’t buy her to do fancy art yarns, so that’s fine, I’m just saying, some types would be too difficult, therefore I am grateful I don’t have to rely on him.
Peter lives on a small, low, ikea table with wheels on the base, so he can be wheeled around. I have to say that I sit back on our deep sofas, mostly crossed legged, and spin in a fairly meditative (read vegetative) state. It is delicious. And when we go on holiday, he happily doesn’t take up much room.
For plying, it is an absolute revelation. Set the speed and feed it in for very fast consistent ply. When doing a simple yarn, it is a joy.
So there you go. Peter has good points and flaws, but overall, I wouldn’t be without him in the spinning wheel family.
Now then, how cool is this. I’m blogging again so soon!
Now I have gratuitously congratulated myself, let’s get down to business.
Christmas was THE most relaxed and wonderful Christmas for many a year. It was delicious. So, I was able to invest lots of time in spinning (which added to the deliciousness). So I thought I would share those yarns and how they were made.
Firstly, I really wanted to make a good (if I do say so myself) bead yarn. Bead yarn is not for the faint hearted, as there are various processes to make it. So, I decided to cut one part out, by using a cotton yarn to ply with, so I didn’t have to make a 2 ply yarn (cheating, but....). Then I made an overtwisted thick and thin from the commercially prepared fleece. Overtwisted because once the two yarns are plied together to make beads, you reverse spin the same area a lot, so you don’t want it to come apart.
This is the result.
The next yarn was the same fleece, but spun as a single, with a little overtwist so that I could full it once finished, to make a stable and substantial single. Because of the wonderful colours in the blend I used, I didn’t want to ply and lose all that loveliness in it becoming muddy.
Next, I used a merino and silk blend, and this time, did make an overtwisted 2 ply yarn. Overtwisted because the next step was a thick and thin that I just wanted to ply with, but again, there is a chance of the yarn coming apart if you are not careful, so overtwisted is best. So, rather than make beads, this time I just plied the thick and thin with the 2 ply. It could be argued that a single, rather than 2 ply would have worked, but 2 ply, although extra work, does give a more stable yarn to ply with.
As it is almost impossible to not have a little bit of single left when making a 2 ply, I decided to make another new art yarn from the leftover. Often, I will Navajo ply the remainder, continuing on the same bobbin from the 2 ply. But, I end up with bits are that a bit useless. I plied the leftover blue with a gold thread and dark blue lurex thread. The lurex was allowed to do what it wanted as I sat spinning. Interestingly, it was fairly even! The gold and blue were alternately plied back on themselves to create small beady areas. Because of the gold thread, it is quite a harsh yarn, so will need to be used thoughtfully and not next to the skin, but it is very pretty (blimey, blowing trumpet again, this just won’t do!)
Finally, I spun 200g of white merino, which I won’t add a piccie of - tad boring. However, it won’t be when it is dyed later on. Natural dyes will be used and I can’t wait to get back to it when the weather improves. Not for the dyeing as such, but the drying thereafter.
So there, a productive time and lush. Life doesn’t get better than this!
Love and light.xx